Pilot planned for the pasteurization of 10 to 100 L / h product at 85 ° C Pasteurization of product with a viscosity lower than 20cP.
Le pasteurisateur se compose de trois zones d'échange thermique en inox 304L :
- Preheating approx. 0.5m˛: tubular heat exchanger incoming / outgoing product,
- Pasteurizer 1,0m˛ approximately: tubular exchanger product / water,
- cooling about 0.5m ˛: tubular product / water exchanger.
The circuit is made of 304L stainless steel and in the SMS standard, it includes:
- a rooming area,
- 30L 30L stainless steel launching tank with lid and drain valve
- A stainless steel centrifugal pump 4bars 250L / h
- a stainless steel needle flow meter (0-160 L / h), on the product supply circuit,
- a flow meter for cold water (60-600 L / h)
- a flow meter for hot water (150-1500L / h)
- a diversion valve at the outlet of the pasteurization zone,
- 5 Pt 100 temperature probes, 3 thermometers,
- a diversion valve depending on the temperature measurement at the pasteurization
- external connections: SMS standards
- a hot water production group
- an electrical box with pump control and protection, temperature controller,
- integrated touch screen temperature display and USB data logging.
- Communication with the PC, software for calculating the pasteurizing value
Option 1: pasteurization of viscous products (max viscosity: 1500 cPo.): A 3 bar max impeller pump, on a drive, used for the process and for cleaning in place, an electromagnetic flowmeter for measuring the feed rate
Option 2: Pasteuristic Value Calculation Software