Your quote (0 machine)
Home > Agribusiness, Pharmaceuticals and Biotechnologies > Food processing > MP302CR

Fluidized bed drying pilot


Service : 8 kW, 220 V mono
Dimensions : 1500 x 600 x 2000 mm

Print / download the product sheet
DEMANDER UN DEVIS POUR CETTE MACHINE

- Study of convection drying of food or pharmaceutical product
- Study of the influence of the load of the product to be treated, the temperature of the air inlet, the air flow
- Measurement and regulation of inlet air temperature
- Exhaust air temperature measurement
- Measurement of the temperature of the product
- Measurement of the differential pressure between the upstream and the downstream of the distributor
- Measurement of the input air flow by anemometric measurement (option)
- Sampling of product
- Measurement of the humidity of the inlet air
- Measurement of the humidity of the outlet air




Technical specifications :

The machine consists of :
 

- A fan of 1.1 Kw maximum flow of 610 m3 / h with speed variator.
- An electric heating of 6000 W regulated by PID regulator.
- A 1.54l product tank with interchangeable sieve and an expansion zone made of polycarbonate or stainless steel with polycarbonate porthole.
- Diameter of the fluidized bed 200 mm, height 1000 mm
- A sampling consisting of a tapping on the product tank and a sliding tube allowing samples to be taken during the process for analysis
humidity.
- Mechanical locking of the product tank
- An air inlet with pre-filter
- Filter at the outlet of the fluidized bed
- Flexible cuff for hot and humid air duct to the outside
- Measurement of temperature and humidity at the inlet and outlet of the column.
- Measurement of the differential pressure upstream / downstream of the air distributor.
- Measurement of the temperature of the product
- Safety thermostat
- Column controlled input temperature with auto-adaptive and programmable digital PID controller.
- Measurement of air velocity by wing profile type probe.
 


- Electrical control and control cabinet comprising :
 

   On / off heating resistors,
   The inlet fluid temperature regulator of the fluidized bed,
   The potentiometer for adjusting the air speed,
   Display settings on a touch screen
   Emergency stop button
   Circuit breakers, transformers, LEDs
 

Note : Do not use with solvents or alcohols.

DEMANDER UN DEVIS POUR CETTE MACHINE

Other machines associated with the category Food processing
Knife shredder
MP602
Read more
Refiner - stoner
MP606B
Read more
Packing press
MP610
Read more
Hydraulic press 90 liters
MP603B
Read more
Enzyme tank
MP604A
Read more
Plate filter
MP341
Read more
Pasteurization pilot with chambering, tubular exchangers
MP312CR
Read more
Manual packaging, capper
MP607/608
Read more
Vacuum evaporator
MP315
Read more
Autoclave sterilization
MP316
Read more
Semi-automatic crimper
MP317
Read more
Appetizer driver
MP450
Read more
Creamer 125l / h
SCR
Read more
Atomization pilot
MP314
Read more
lateral drying and fluidized
MP302S
Read more
Tangential microfiltration pilot
MP353
Read more
Pilot pasteurization plate triquetage (for plant and animal products)
MP313A
Read more
Streaming pasteurization pilot with simplified sorting plates
MP313S
Read more
Maturation tank
MP604C
Read more
Semi-automatic heat sealer
038DIA
Read more
Oven with yogurt 140 pots
038AAA
Read more
Refrigerated cabinet
053HAA
Read more
Cleaning station in place
SNEAP03
Read more
Fermenter - sterilizer
MP320
Read more
Downflow evaporator
MP1053
Read more
Single-stage pasteurizer
MP312 Mono
Read more