Your quote (0 machine)
Home > Water and waste treatment > Water treatment > MP140

Filtration on media - filter press


Non contractual photo

Service : (2-part chassis)
Dimensions : 1200 x 830 x 1700 mm + 830 x 1200 x 1100 mm

Print / download the product sheet
DEMANDER UN DEVIS POUR CETTE MACHINE

This pilot allows the study of the filtration on support. The method comprises circulating a fluid containing solid particles through a support (web, felt, membrane, ...) on which the particles are deposited in the form of a cake of increasing thickness. The more or less pure filtrate according to the texture of the support and the dimensions of the particles passes through the support, it is the filtration on cake. The operation is performed here discontinuously.
 

  • Study of the resistance of the support and the filter.
  • Checking the law of DARCY.
  • Determination of the curve P = f (Q) and identification of the various flow regimes (for a "concentration" of pollution to treat and a given pressure, we can draw t / v = f (v)).
  • Determination of the clogging point.
  • Estimate of the porosity of the cake.



Technical specifications :
  • Filter press: frame surface 250 x 250 mm
  • cast iron frame
  • filter on wheels
  • 7 trays for 15mm cakes
  • Pneumatic pump with polypropylene membrane,
  • 2 tanks with drain and withdrawal valves
  • 1 Variable speed stirrer, 2 propellers
  • 2 manometers
  • Regulator regulator with filter
  • 3 Float flow meters (feed, permeate, filtrate at the filter outlet)
  • The pilot is mounted on a stainless steel frame with aluminum nuts. The supply circuit of the pump is made of flexible PVC.
     

This filter press makes it possible to study the variations of performances for different hydraulic conditions imposed (constant flow, variable pressure or constant pressure and variable flow).
The pneumatic diaphragm pump offers a wide range of flow rates. It works up to 5 bars.
This type of pump is suitable for receiving viscous, filled or abrasive solutions and is not damaged in case of operation without any liquid.

Options :
Recommended products: Kieselguhr or Clarcel solution
Compressed air supply (minimum 2 bar / maximum 5 bar)
220V power supply - single phase -200W
DEMANDER UN DEVIS POUR CETTE MACHINE

Other machines associated with the category Water treatment
Wastewater treatment pilot with activated sludge
MP43
Read more
Activated sludge wastewater treatment pilot, anoxia at the head, nitrification, denitrification
MP44
Read more
Wastewater treatment pilot
CP143
Read more
Bacterial culture in anaerobic environment
MP45
Read more
Anaerobic digestion pilot in stirred tank
MP30
Read more
Coagulation pilot flocculation decantation
MP50AB
Read more
Two-stage decantation flocculation coagulation pilot with ph dosing station
MP50ABC
Read more
Coagulation pilot flocculation decantation
MP50CR
Read more
Activated carbon filtration pilot
MP35
Read more
Sand gravity filtration pilot
MP31
Read more
Activated carbon filtration pilot
MP35CR
Read more
Filtration pilot on sand and activated carbon desinfection by chlorine
MP32CR
Read more
Filtration pilot on sand and activated carbon desinfection by chlorine
MP32
Read more
Process pilot physical and chemical filtration - deferrisation - dechlorination - disinfection by chlorine
MP33
Read more
Potability pilot
CP155
Read more
Ion exchange driver
MP11
Read more
Ion exchange driver
MP11CR
Read more
Ultrafiltration driver
MP90
Read more
Reverse osmosis pilot
MP20
Read more
Reverse osmosis and nanofiltration pilot
MP72
Read more
Advanced oxidation pilot
MP36
Read more
Membrane bio reactor
BRM
Read more
Complete water treatment and drinking water line
MP32-MP43-MP50
Read more
Water treatment by bacterial culture on a fixed bed in anaerobic medium
MP42-b
Read more
Water treatment by softener
MP9
Read more
Dioxygen transfer study bench
MP46
Read more