Your quote (0 machine)
Home > Water and waste treatment > Water treatment > MP32CR

Filtration pilot on sand and activated carbon desinfection by chlorine


Non contractual photo

Service : 220 V - 50 Hz single phase, 500 W
CuSo4 10-3 M solution with slaked lime (50 mg / L)
Dimensions : 2000 x 800 x 1900 mm

Print / download the product sheet
DEMANDER UN DEVIS POUR CETTE MACHINE

This unit completes the coagulation pilot-flocculation-decantation to make drinking water. It consists of a sand filter, an activated carbon filter to remove residual microorganisms and colloids from the water coming out of the sand filter and a chlorine disinfection module.
This unit connects electrically to the coagulation-flocculation-settling unit MP50ABC (provided in item1) for tank level management.

This unit allows the study of the filtration thanks to the piezometric tubes placed along the column of sand (Study of the law of Darcy, the porosity of the bed of sand, the permeability according to the height of water, the clogging of the filter, efficiency of the backwash). With sand filtration you can also use the de-ironing process with bleach or the appropriate flocculant and dechlorinate and / or bleach with the activated carbon filter by checking the continuous chlorine level at the outlet of the filter. column.




Technical specifications :
  • Two tanks (supply of product to be treated and intermediate tank before activated carbon filter)
  • Disinfection station consisting of: A tank for chlorine storage; A tank to adjust the chlorine; A chlorine dosing pump; A feed pump of the chlorine measuring circuit; A continuous chlorine measuring probe and its transmitter with 4-20 mA output and 2 relay outputs
  • An agitator
  • An Altuglass column (sand filter)
  • A battery of piezometric tubes for the measurement of the losses of charges, mounted on graduated panel
  • An Altuglass column (activated carbon filter)
  • A manometer
  • A centrifugal feed pump for sand filter
  • Centrifugal feed pump for activated carbon filter
  • two flowmeters
  • Two levels of low safety for the pumps (the high safety of the tanks will be ensured by overflows)
  • The assembly is mounted on stainless steel chassis, the pipes are PVC.
  • The control cabinet includes the safety relays and the protection of the three pumps.
DEMANDER UN DEVIS POUR CETTE MACHINE

Other machines associated with the category Water treatment
Wastewater treatment pilot with activated sludge
MP43
Read more
Activated sludge wastewater treatment pilot, anoxia at the head, nitrification, denitrification
MP44
Read more
Wastewater treatment pilot
CP143
Read more
Bacterial culture in anaerobic environment
MP45
Read more
Anaerobic digestion pilot in stirred tank
MP30
Read more
Filtration on media - filter press
MP140
Read more
Coagulation pilot flocculation decantation
MP50AB
Read more
Two-stage decantation flocculation coagulation pilot with ph dosing station
MP50ABC
Read more
Coagulation pilot flocculation decantation
MP50CR
Read more
Activated carbon filtration pilot
MP35
Read more
Sand gravity filtration pilot
MP31
Read more
Activated carbon filtration pilot
MP35CR
Read more
Filtration pilot on sand and activated carbon desinfection by chlorine
MP32
Read more
Process pilot physical and chemical filtration - deferrisation - dechlorination - disinfection by chlorine
MP33
Read more
Potability pilot
CP155
Read more
Ion exchange driver
MP11
Read more
Ion exchange driver
MP11CR
Read more
Ultrafiltration driver
MP90
Read more
Reverse osmosis pilot
MP20
Read more
Reverse osmosis and nanofiltration pilot
MP72
Read more
Advanced oxidation pilot
MP36
Read more
Membrane bio reactor
BRM
Read more
Complete water treatment and drinking water line
MP32-MP43-MP50
Read more
Water treatment by bacterial culture on a fixed bed in anaerobic medium
MP42-b
Read more
Water treatment by softener
MP9
Read more
Dioxygen transfer study bench
MP46
Read more