Skip to content. | Skip to navigation

Sections
You are here: Home / Process Engineering / Industrial Engineering / Process Control / WATER TEMPERATURE CONTROL BENCH MP118

WATER TEMPERATURE CONTROL BENCH MP118

A Pt100 temperature probe measure water contained in vat. This one include all security devices as overflow draining, a low level security alarm. The electric heater immersed in the vat is equipped with a security thermostat controled by a PID conroller. The vat is stirred. The controller also control an electro valve which inject cold water to create a disturbance.

MP118

Teaching objectives

- Study of temperature control with two different actuators (1st range process)
- Split range control
- Study of a static answer
- Identification in open and closed loop mode
- Measure of the output power of the regulator on the control cabinet with the help of secured plugs
- Disturbance of the set point.

 

Technical specifications

- A tank made of stainless steel with draining and overflow
- An electric heater - power 1,5 kW
- A Pt 100 temperature probe
- A security thermostat
- A low level security of the heater
- A flow meter for the cold fluid
- A stainless steel pump
- A disturbance temperature circuit
- A set of manual valves
- A converter
- A numeric controller :
Universal entry: mV, V, my, T/L, RTD,
Algorithm of regulation: P, PI, PID, autoadaptatif

OPTIONS :
- Data acquisition module ref MAC composed with :
- A regulator with a RS485 communication card. In this case the reference number of the equipment equipped with the regulator with card become MP118VE
- A converter RS485/RS232
- A data acquisition software under Windows allowing :

- Reading PID parameters,
- The drawing of the curves,
- The remote control of the regulator parameters
- The storage of the values

- PC computer type Pentium IV

 

Dimensions and weight

1 700 x 1 500 x 600 mm - 120 kg

 

Essential requirements

Power supply : 220 V three phases - 50 Hz – 2 kW (other voltages on inquiry)