Temperature regulation bench

MP118C

DEMANDER UN DEVIS POUR CETTE MACHINE

Service : Power supply: 220 V mono - 50 Hz - 6.5 kW

Dimensions : 1500 x 500 x 1700 mm

Poids : 100 kg

Imprimer/t�l�charger la fiche produit

DEMANDER UN DEVIS POUR CETTE MACHINE

Description :

The loop is composed of a temperature measurement by Pt100 probe of the water at the outlet of a heater, a heating resistor driven by a static power unit, a converter and a regulator
The heating resistor is equipped with an adjustable safety thermostat. The mains water supplies the heater with an open circuit. The variable flow is measured by means of a flow meter. We study the return to a setpoint programmed according to a disturbance of flow.

Sp�cifications techniques :

The bench consists of :

Electric resistance with stainless steel casing
A temperature sensor
A safety thermostat (regulator)
Water Presence for Float Meter with Magnetic Retransmission
Flow meter for cold fluid
A control valve for the flow (temperature disturbing circuit)
A set of manual valves
A digital regulator
Universal input: TC, Pt100, mA, mV, V, Hz
4-20 mA control output
Triple display output / setpoint
Regulatory algorithm: P, PI, PID, self-adaptive
RS485 communication card

A control / command cabinet with control and protection of the heating resistor and the static power unit, the controller with display of the measurement and the setpoint, connections on the front of the cabinet with secure plugs for measurement of the input and the output of the regulator (0-10V).

Options :

MAC Acquisition Module:
RS485 / RS232 converter for PC acquisition
Windows operating system allowing:
reading PID parameters
the plot of the curves
the configuration of the remote controller
archiving values

DEMANDER UN DEVIS POUR CETTE MACHINE

Autres machines associ�es � la cat�gorie Regulation

Banc de d�bitmetrie

MP83