Your quote (0 machine)
Home > Chemical Processing > Chemical Processing > MP1030CR

Fluid-liquid extraction


Service : 230 V / 50 Hz / Single phase: 1 kW.
Evacuation of solvent vapors
Dimensions : 1,50 m x 0,85 m x 2,00 m
Weight : 120kg

Print / download the product sheet
DEMANDER UN DEVIS POUR CETTE MACHINE

Principle and operation


Liquid-liquid extraction is used to transfer a solute (dissolved in a diluent and forming the solution) into a solvent with which it has more affinity; the diluent and the solvent are immiscible. The light phase is introduced at the bottom of the column and then goes back to the upper decanter of the column. The heavy phase introduced at the top of the column goes down to the settling zone located at the bottom. A stirring assembly (consisting of a succession of turbines and settling trays distributed along the column) allows a mixture of the two phases circulating against the current and causes the transfer of the solute to be extracted in the solvent. Decanters are used for the separation of immiscible phases; the solute enriched extract phase and the solute depleted raffinate phase are continuously withdrawn from these settlers.




Educational Objectives :
  • Influence of solution and solvent flow rates
  • Influence of agitation.
  • Material balance.
  • Number of theoretical plates (McCABE and THIELE, ternary diagrams).
  • Number of transfer units.
  • Coefficients of exchange of matter.
Technical specifications :

Technical specifications
 

  • Two cans of solution storage and polyethylene feed solvent.
  • Dosing pump supplying the solution.
  • Solvent feeding pump.
  • Lower borosilicate glass settling tank with light phase introduction, heavy phase output and sampling valve.
  • Upper borosilicate glass settling tank with heavy phase introduction, light phase outflow by overflow and sampling valve.
  • Borosilicate glass column in two parts.
  • 316L stainless steel turbine stirring unit driven by an electric motor.
  • Three guiding and sampling plates in 316L stainless steel.
  •  Two cans of recovery
  • 316L stainless steel connection pipes.
  • Support frame in 304L stainless steel tubes and aluminum nuts.

     

Instrumentation
 

  • Control and control cabinet, IP55, equipped with emergency stop, operating buttons and the following interfaces:
  • Variator of stirring speed
DEMANDER UN DEVIS POUR CETTE MACHINE

Other machines associated with the category Chemical Processing
Mini photo-bio-reactor for algae culture
MP46bio
Read more
Pellet granulator mixer
MP411-a
Read more
Laboratory cascading crystallization
MP1002
Read more
Evaporation - discontinuous crystallization
MP1003
Read more
Evaporation - continuous crystallization
MP1004
Read more
Continuous distillation
MP1010
Read more
Continuous distillation
MP1010CR
Read more
Supervised continuous distillation
MP1011
Read more
Supervised continuous distillation
MP1011CR
Read more
Continuous azeotropic distillation
MP1012
Read more
Discontinuous distillation
MP1020
Read more
Discontinuous distillation
MP1020CR
Read more
Flash distillation
MP1025
Read more
Atmospheric dynamic ebulliometry
MP1026
Read more
Fluid-liquid extraction
MP1030
Read more
Supervised liquid-liquid extraction
SP1030
Read more
Pulse liquid-liquid extraction
MP1031
Read more
Solid / liquid discontinuous extraction (soxhlet) and discontinuous distillation
MP1035
Read more
solid / liquid discontinuous extraction (soxhlet)
MP1036
Read more
Absorption / desorption
MP1040
Read more
Absorption / desorption
MP1040CR
Read more
Ascending film evaporator
MP1050
Read more
Double effect ascending film evaporator
MP1052
Read more
Reacted reactor 10 liters
MP1070
Read more
10 liter multi-purpose stirred reactor
MP1071
Read more
laboratory reactor
MP1073-a
Read more
Laboratory reactor
MP1073CR
Read more
Synthetic unit of synthesis 25 liters
MP1074
Read more
Versatile synthesis unit 50 liters
MP1075
Read more
Reactors stirred - piston
MP1076
Read more
Mixer, decanter, liquid-liquid extraction
MP1032
Read more
Wastewater treatment pilot
MP42-a
Read more