Skip to content. | Skip to navigation

You are here: Home / Process Engineering / Process Engineering / Food Engineering / HYDRAULIC PRESS MP603



- This stage allows the pressing of the mixture obtained after crushing.
- This system has the advantage of not using electrical energy but only water.
- Water tightens the natural rubber membrane towards the exterior and compresses the pulp against the stainless steel netted hammer.
- An exhaust valve protects against any possible overpressure.
- This system combines pressing and coarse filtration using a filtering canvas which catches the waste.
- Juice is recovered in a food polyethylene vat (optional).

Teaching objectives

Study of the press efficiency according to hydraulic input conditions of the module (water pressure).


Technical specifications

- Protecting cover
- Closing nut
- Ring
- Cover
- Filtering weaved bag
- Stainless steel basket
- Exhaust valve
- Shaft

- Complete basis with :
- Natural rubber membrane
- Feet
- Water outlet valve
- Pressure valve
- Water inlet pipe with GEKA fitting
- Manometer 0-6 bar


- Permanent exhaust 40 litres : Dimensions (H x l x p) : 900 x 480 x 480

- Permanent exhaust 90 litres : Dimensions (H x l x p) : 1070 x 590 x 590


Essential requirements

Permanent water supply (3 bars)


MP603 diagram - click to enlarge :

MP603 SA