Skip to content. | Skip to navigation

Sections
You are here: Home / Electrotechnical Engineering - Maintenance / Maintenance / MODULAR OIL HYDRAULIC TRAINERS SH MILLENIUM

MODULAR OIL HYDRAULIC TRAINERS SH MILLENIUM

The hydraulic trainer SH Millennium has been designed to answer to the increasing need of a “a la carte“ teaching and training, allowing to quickly change the configuration of the simulator in order to make it accessible to all training levels.

SH MILLENIUM

The SH Millenium has potential for additional facilities, as it allow to be completed by other types of hydraulic groups, by traditional or proportional hydraulics modules, by open or close loop electronic command cards or by data acquisition system.

The SH Millenium frame allow to be configured, either in single side allowing connection of hydraulic modules to the rear or to the front of the frame, or either in double side, allowing a double work station.
The hydraulics power stations dedicated to the SH Millenium trainer exist with fixed pumps capacity, either with a simple power-driven pump unit for the single side frame, or either with a double power-driven pumps unit for the double-side frame.

We propose for information only, different basic configurations that can evidently evolve or to be chosen according to your training needs.

 

Technical specifications

Different standard configuration can be proposed :

1/ CONVENTIONAL HYDRAULICS

MIL-BS BASIC HYDRAULICS CONFIGURATION WITH MANUAL CONTROL: 
Hydraulic frame mounted on castors including 15 modules

MIL-EL ELECTRO-HYDRAULICS CONFIGURATION : 
Including 5 modules 
1 electric board MIL-PLE including 3 push buttons, 3 turning buttons and 4 relays, 
1 set of electric leads with 4 mm safety plugs, 
1 storing support for electric leads. 

MIL-AV ADVANCED HYDRAULICS CONFIGURATION :
Hydraulic frame mounted on castors including 5 modules 

MIL-MO MOBILE HYDRAULICS CONFIGURATION : 
Hydraulic frame mounted on castors including 6 modules

2/ PROPORTIONAL HYDRAULICS

MIL-PRBO OPEN LOOP PROPORTIONAL HYDRAULICS CONFIGURATION: 
Hydraulic frame mounted on castors including 10 modules
1 electric board MIL-PLE including 3 push buttons, 3 turning buttons and 4 relays

MIL-PRBF OPEN LOOP PROPORTIONAL HYDRAULICS CONFIGURATION AND SERVOCONTROL: 
Hydraulic frame mounted on castors including 10 modules

A 19 '' rack including : 
· 1 numeric regulator configurable in open loop or closed-loop with PID algorithm, 
·2 potentiometers, 
·2 switches, 
·1 relay, 
·1 two-way commutable voltmeter, 
·1 two-way commutable ammeter.

The system is completely modular and we propose up to 88 different modules covering conventional and proportional hydraulics.

3/ HYDRAULIC POWER STATIONS

Simple hydraulic power station with fix capacity ref MIL-CBS mounted on castors including :
(Equipment for single side bench) 

Double hydraulic power station with fix capacity ref MIL-CBD mounted on castors including :
(Equipment for double sides bench)

Simple hydraulic power station with variable capacity ref MIL-CPR mounted on castors including : 
(Equipment for single side bench)

Double hydraulic power station combined MIL-CMIXTE mounted on castors including : 
(Equipment for double sides bench)

 

Dimensions and weight

2120 x 700 x 1700 - 110kg / 140kg

 

Essential requirements

Electric power supply : 3 x 400 V + N + T