Skip to content. | Skip to navigation

You are here: Home / Electrotechnical Engineering - Maintenance / Electrotechnical Engineering / INDUSTRIAL PALLETIZER TRI TECH


Machine designed around an industrial palletization hydraulic table. It use 3 different kind of energies; hydraulics, electric and pneumatic.


Technical specifications


Mechanically welded fame with protective grille enclosure including:

-A table with rollers for the supply of the palletizer,

- A palletization table actuated by an hydraulic lifting jack of diameter 50 mm and secured by a balancing valve,

- A loading device actuated by a translation hydraulic jack,

- A table with rollers for the emptying of the pallets,

- Access to the machine by a door with a door electric contact and a key locking device.


A separated hydraulic power station including:

- A motor-pump device 0,75 kW, 3 liters/minute, pressure: 80 bars,

- A tank of 28 liters equipped with a visual level, with thermometer,

an air filter, a filling and draining plugs, and a backflow filter,

- A pressure limiter,

- A pressure gauge,

- Three electro-hydraulics distributors,

- Two flow limiters,

- A set of hydraulic cables,

- A set of protective hydraulic plugs.


A control cabinet equipped of:

- A PLC Schneider NANO including 9 inputs and 7 outputs, a UNITEL WAY port and a RS485 MOD-BUS port,

- An interactive terminal MAGELIS XBTP, 2 lines of 16 characters and 12 keys functions,

- A magneto thermal starting and protection system for the motor starting.

- A safety logic block (PREVENTA or equivalent) to manage the openings of the doors.


Front view:

- A power on light,

- An emergency stop button,

- A padlocked disconnecting switch,

- A power on button,

- Predisposition for the electric actuator,

- Predisposition for the pneumatics pre-

actuators and the electric actuator.


Technologies of the detectors:

- Opto-Electronic,

- Inductive of proximity,

- Safety detection with key for the doors.


Technologies of the actuators:

Hydraulic technology:

The equipment is equipped of origin with hydraulic actuators on the loading device and on the palletization table. These actuators can be replaced, respectively, by a pneumatic and an electric equivalent.


Electric technology:

The package is provided with a replacement kit of the palletization hydraulic jack (jack of the table) by an electric jack. It is supplied with all the connecting accessories.


Pneumatic technology:

The package is supplied with a replacement kit of the table loading hydraulic jack by an pneumatic jack equipped with a flow limiter. It is supplied with all the connecting accessories, an FRL plate with a safety solenoid valve, a pneumatic distributor.


Supplied with the machine:

- 15 steel plates: thickness 4 - 400 x 400 mm,

- 15 panels of "Medium": thickness 20 - 400 x 400 mm,

- The technical manual,

- The training manual, dedicated to Maintenance.


" Breakdowns" Kit, including some real, deficient components,:

- 1 deficient hydraulic jack,

- 1 distributor coil in short circuit,

- 1 deficient distributor (worn-out slide),

- 1 deficient limit switch,

- 1 deficient inductive sensor,

- 1 deficient safety lock.



Subsystems for technological studies

- complementary lift table,

- complementary hydraulic power station,

- complementary hydraulic Jack.


TOPKAPI supervision:

The software communicates in MOD BUS by a RS485 link with the PLC. It allows mainly the access to the parameterization by various application windows and a data historization of the alarms.


Dimensions and weight

(L x l x w): 4600 x 1600 x 1700 mm - 450 kg